Installing and use of XPRS-PCI-X1
1. Introduction
The XPRS-PCI-X1 connects with one of our XRPS-HOST-.. cards, and allows using of PCI peripheral cards outside of a computer system.
[Click to enlarge]
The image shows XPRS-PCI-X1 product, cables coming from XRPS-HOST-.. card, and one PCI peripheral card.
2. Preliminary step
Based on the computer system one preliminary step is installing of a xprs-host-ec on a notebook system with an ExpressCard slot
3. Assembly of XPRS-PCI-X1
There are 2 ways to connect the 2 cables to the connectors on XPRS-PCI-X1.
[Click to enlarge]
Make sure that the XPRS-HOST-.. card is inserted, and the host computer system is powered on.
The image above shows the wrong way of connecting the cables to the connectors - the onboard LED is not lit, the LED is not on.
In such case remove both cables, switch positions, and plug to the other connectors.
The image below shows the right way - the onboard LED is lit, the LED is on.
[Click to enlarge]
The PCI interface requires either 3.3V, or 5V, or both voltages to be supplied for the PCI card.
The image below shows 5V power supplied to XPRS-PCI-X1 for the PCI card.
[Click to enlarge]
If unsure on the power requirements of a particular PCI card, please use one of our PWR-5V products to have 5V power supplied to XPRS-PCI-X1 for the PCI card.
4. Insert / remove of peripheral cards
When the host system is a notebook, and the operating system supports ExpressCard slots, you can dynamically insert/remove PCI card on XPRS-PCI-X1.
When the host system is a desktop, or the operating system does not support hot insert/ remove of PCI Express based peripherals you need to:
- power off host system
- mount XPRS-HOST-.. in the system
- connect cables to XPRS-PCI-X1 - in the proper way
- mount PCI card
- power on host system
[Click to enlarge]
5. Additional ways of use
5.1. Adding power
PCI cards may optionally use also +12V and -12V for powering.
If a PCI peripheral card needs +12V and -12V with current consumption of up to 50mA, you can add the ISA-PWR power module.
[Click to enlarge]
If a PCI peripheral card needs +12V and -12V with high current consumption, you can add the ISA-PWR-XR external power supply.
[Click to enlarge]
The power jumpers positions may need to be moved - please check the User's Guide .pdf, the chapter on XPRS-PCI-X1, for details.
5.2. Putting in an enclosure
The XPRS-PCI-X1 together with the PCI card may be mounted in an enclosure.
The image below shows putting the cards in our ISA-PCI-B1 enclosure.
[Click to enlarge]
Longer and larger PCI card may be put in our ISA-PCI-B2 enclosure.